Replace Lock in UPVC Door
If you've got a upvc door lock that isn't working properly you should call in a professional locksmith. They are fast efficient and will complete the task to the highest standards.
It's not that difficult to replace a upvc bar lock. It's just a matter of knowing what is involved and follow the steps below.
Removal of the Barrel Lock
uPVC doors and windows are extremely common in a variety of homes. They let light be able to enter the home and can be opened easily with the correct key. Switching the barrel of a lock on the uPVC door is an easy task that takes only five minutes. If you've lost your keys, a tenant left and hasn't returned them, or the barrel of your lock is damaged and needs to be replaced, this is an easy solution.
You will need to remove the handle screws first. This will allow you to move the handles removed from the way so that you can access the lock barrel screw. It is important not to loosen the screws quickly because this could damage the handles.
After the screws have been removed, look for the screw that holds the barrel lock in place on the inside of your door. The screw is different in color to the other screws on your door and stands out. With a Phillips screwdriver, remove the screw. Use the key you use to open the lock, and insert it into the barrel. Then, turn it to the right as much as you can. This should free the barrel and make it easier to pull it out of the door.
After loosening the screw, you can now break the pins that hold the Euro Cylinder in place. You'll require a pair of strong pliers or mole grips to do this. Grasp the protruding portion of the euro cylindrical cylinder and bend it upwards and down, and from side to side. This will break the support pins that hold it in place.
Installing the new cylinder can be done after the old one is removed. To ensure you purchase the right replacement, you need to first take a measurement of the lock cylinder. You can do this by measuring the distance between the middle of the circular keyhole and the center of square spindle. The measurement must be taken from the upper spindle hole.
Change the Cylinder
The primary locking mechanism is a euro cylinder. It is easy to change and don't require an expert locksmith or handyman service. If yours does not have this security, you need to replace it with one that does. They are incredibly inexpensive and could save you money as well as inconvenience if your locks have been affected by these security threats.
To start you must open the door and stand in front of it, so that you can reach the screw that holds the handle by hand or using a suitable tool. You can loosen the screw a little bit or perhaps a quarter turn to get started.
The cylinder should now be able to be removed easily because the screw will not be able to hold it in position. The next step is to decide on the size of replacement cylinder you require. There are about 25 different sizes available. It is a good idea to bring the old cylinder with you when purchasing the new one so you are sure it will fit.
If you're not sure of the dimensions, measure from the screw hole's center to the end of cylinder. You can only be sure that you're purchasing the correct sized cylinders for your door made of upvc by measuring from the center of the screw hole to the end of the cylinder.
When you have your new cylinder ready, insert it into your door in reverse order to the way you removed the old one. It may be a little tricky to align the lock cam, but this is usually just an issue with alignment, and will be fixed eventually.
Now you will need to insert the long securing screws. Once this is done you can test the new cylinder to ensure it is securely inside the door. If you're satisfied with how secure it is, now re-attach the handle and close the door to test again. If everything is working properly the cylinder lock on your door made of upvc has been replaced and has added an extra layer of security for your home.
Change the Handle
There are several reasons why the handle of a door or knob for the door can become loose. This could be due to wear and tear of the handle itself or it could be due to the square spindle in the handle becoming worn or loose due to excessive use or force. In this case the door handle will need to be replaced.
It is essential that the door is open to allow it to close between removing the handle and replacing it. Remove the screws from the interior surface of the plate by using a screwdriver. This will free your handle from the plate. Be careful not to lose these screws as they will need to be re-screwed back to their original position later.
Once the handles are removed you can now open the cylinder lock within the door. The lock will be a circular or bulb shaped cylinder that is only found in multi-point locks on upvc doors, as well as some aluminium doors. It is like changing the handle. The only difference is that you'll need to remove the old cylinder off the door and replace it with a new one.
When selecting a replacement handle it is important to consider its size. Make sure the handle you choose is identical in size to the original one as it will have to be able to be able to fit over the existing screws that secure the handle. A good place to start is by using a size matrix that will provide the standard sizes of replacement handles, as well as their keyhole center to handle plate distance.
Consider upgrading your upvc door handles to a more secure standard like a Sold Secure SS301 set or 2* Kitemark security handles. This will improve the security of your home and making it easier to operate the door. The price of these sets might be a little more expensive, but the added peace of mind and security is worth it. Having to constantly push the handle of the door up and down to open and shut it is not something you want to be doing.
Modifying the Lock
The security lock on your uPVC door could be a weak point for burglars. Upgrade your uPVC to a multipoint locking system to ensure its security. This would include an open hook and deadbolts to deter burglars. A professional locksmith can assist you with this, but it is also possible to do the work yourself. You'll require some tools, but the process is easy and quick.
The first step is to loosen the screws that hold the handle in the position. By using a screwdriver you can remove the screws and put them in a safe place. Then, you can lift the handle and reveal the screw that holds the cylinder in place. This screw can be unscrewed and replaced with a new one. Make sure the screw is identical to the original. It should be aligned properly with the barrel of the lock.
Making changes to the lock of your uPVC is a daunting task. It is crucial to the security of your home. If you make mistakes, it may make it impossible to unlock the door. If you know how to accomplish it, the procedure is relatively simple and will cost you less than calling a locksmith.
You will need to remove the faceplate on the inside of the lock in order to replace the lock. You'll need to look for the screw inside the door and the bolt that holds it outside the door. Once you have these screws in your hands, you are able to remove and replace the faceplate.
There are a variety of reasons you might need to change the lock on your uPVC doors. door lock window repairs might need to alter the lock on your uPVC door due to various reasons.
Anyone with a basic DIY skill can alter the locking mechanism made of uPVC. You will need to inspect the hinges inside the mechanism, which could be difficult to do if the lock is sticking. If the hinges have been lubricated it is a simple repair. If you do not feel comfortable doing this, it is best to consult an expert.